MLC 62 RS EU

Details
Fabrikant Extron Prijs € 500,00
Productsheet   Dealerinkoopprijs Dealerinkoopprijs


MLC 62 Series

Control — host ports

Serial control port 1 bidirectional RS-232 on a 3.5 mm captive screw connector, 3 pole
Baud rate and protocol 9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations Pin 1 = TX, pin 2 = RX, pin 3 = GND
USB control ports 1 front panel female mini USB B
USB standards USB 2.0, low speed
IR learning frequencies 30 kHz to 150 kHz
IR learning distance 4" (10 cm) to 14" (36 cm) from the receiver (on front panel for Decora models, side panel for EU models)
Program control Extron configuration program for Windows®
Extron Simple Instruction Set (SIS™)

Control — serial port (RS models)

Display control port (1) 3.5 mm captive screw connector, 2 pole for unidirectional RS-232 control (±5 V)
Baud rate and protocol (RS-232) 9600 (default), 19200, 38400, 57600, 115,200 baud; 8 (default) or 7 data bits; 1 stop bit; no parity (default), or even or odd parity

Control — IR port (IR models) or IR/serial port (RS models)

IR control port (1) 3.5 mm captive screw connector, 2 pole for IR or IR/Serial* (transmit only)
TTL level (0 to 5 V) modulated infrared control (all models) from 30 kHz up to 150 kHz, or ±5 V RS-232 control (RS models, transmit only)
*For RS models, IR/serial ports are configurable via software, serial communication is the default.
Baud rate and protocol For RS models:
9600 (default), 19200, 38400, 57600, 115,200 baud; 8 (default) or 7 data bits; 1 stop bit; no parity (default), or even or odd parity

Control — relay (RS models)

Number/type 2 momentary or latching (configurable via software)
Connector (1) 3.5 mm captive screw connector, 3 pole
Contact rating 24 V, 1 A

Control — digital input monitoring port (RS models)

Number/type 1 digital input (configurable)
Connector (1) 3.5 mm captive screw connector, 2 pole
Digital inputs
Input voltage range 0-24 VDC
Input impedance 12k ohms
Programmable pullup 2k ohms to +5 VDC
Threshold low to high >1.5 VDC
Threshold high to low <1.0 VDC

General

External power supply 100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated
Power input requirements 12 VDC, 0.4 A, max.
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, no vents
Mounting
Rack mount No
Furniture or wall mount
Decora® models Yes, mounts in a standard 1 gang US electrical junction box (1.50" depth) or with included mud ring.
EU models Yes, mounts in a standard 1 gang EU electrical junction box with 60 mm mounting centers (40 mm depth). An adapter frame is included.
Enclosure type Plastic
Enclosure dimensions
MLC 62 IR D, MLC 62 RS D
Faceplate 2.6" H* x 1.3" W x 0.2" D
(6.6 cm H* x 3.3 cm W x 0.4 cm D)
(Fits the opening in a 1 gang Decora® faceplate. *Height is 2.8" [7.0 cm] and width is 1.5" [3.8 cm] including outer shoulders.)
Device 2.8" H x 1.8" W x 0.9" D
(7.0 cm H x 4.5 cm W x 2.1 cm D)
(Overall rear dimensions, including connectors. Allow at least 1.5" [3.7 cm] depth in the wall or furniture for device and cable clearance.)
MLC 62 RS EU
Faceplate 2.2" H x 2.2" W x 0.3" D (1-gang EU, fits a Jung AS 500 wallplate)
(5.5 cm H x 5.5 cm W x 0.7 cm D)
Device 1.9" H x 2.0" W x 0.7" D
(4.8 cm H x 5.2 cm W x 1.8 cm D)
(Overall rear dimensions, including connectors. Allow at least 1.25" [3.2 cm] depth in the junction box for device and cable clearance.)
Product weight
MLC 62 IR D, MLC 62 RS D 1.0 lb (0.5 kg)
MLC 62 RS EU 1.0 lb (0.5 kg)
Shipping weight 3 lbs (2 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI Class A
Accessibility Section 508 of the Rehabilitation Act (29 U.S.C. 794d)
MTBF 30,000 hours
Warranty 3 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.