MLC 104 Plus

Details
Fabrikant Extron Prijs € 620,00
Productsheet   (1561 KB) Dealerinkoopprijs Dealerinkoopprijs


MLC 104 Plus

Control — host ports

Serial host port 1 bidirectional RS-232 front panel 2.5 mm mini stereo jack
Baud rate and protocol 38400, 8 data bits, 1 stop bit, no parity
Serial control pin configurations Mini stereo jack: tip = TX, ring = RX, sleeve = GND
Secondary control panel (SCP) (1) 3.5 mm 5-pole direct insertion captive screw connector
Program control Extron′s Global Configurator for Windows®, version 2.5 or later
Extron′s Simple Instruction Set (SIS™)
IR learning frequencies 30 kHz to 62 kHz
IR learning distance 2" (5.1 cm) to 12" (30.5 cm) from the top panel

Control — serial ports

Display control port (1) 3.5 mm direct insertion captive screw connector, 3 pole, for bidirectional RS-232 control (± 5V)
Switcher control port (1) 3.5 mm direct insertion captive screw connector, 3 pole, for bidirectional RS-232 control (±5 V)
Baud rate and protocol (RS-232) 115200 to 300 baud (9600 baud = default); 8 (default) or 7 data bits; 1(default) or 2 stop bits; no parity (default), or even or odd parity

Control — IR port

IR control port (1) 3.5 mm direct insertion captive screw connector, 2 pole
TTL level (0 to 5 V) infrared control up to 1 MHz

Digital I/O control

Number/type 3 digital input/output (configurable)
Connector (1) 3.5 mm direct insertion captive screw connector, 4 pole
Pin configuration 1, 2, 3 = digital inputs/outputs 1, 2, and 3; GND = GND
Digital inputs
Input voltage range 0-12 VDC
Input impedance 28k ohms
Programmable pullup 2k ohms to +5 VDC
Threshold low to high >2.8 VDC
Threshold high to low <2.0 VDC
Digital outputs 250 mA sink from 24 VDC, maximum

General

External power supply 100 VAC to 240 VAC, 50/60 Hz, external; to 12 VDC, 1 A, regulated
Power input requirements 12 VDC, 0.285 A (0.305 A if used with an optional IRCM-DV+)
NOTE An MLC 104 Plus controller must be powered by its own power supply. It cannot be powered by an MLS switcher.
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, unvented
Mounting
Rack mount Yes, with optional rack mounting kits
Wall mount Yes, wall- and furniture-mountable with optional mounting kits
Enclosure type Metal faceplate, metal rear enclosure
Enclosure dimensions
MLC 104 Plus faceplate 4.5" H x 4.6" W x 0.1" D (11.4 cm H x 11.7 cm W x 0.3 cm D) (2 gang)
Device 2.7" H x 3.4" W x 1.8" D (6.9 cm H x 8.6 cm W x 4.6 cm D)
(Depth excludes knob and buttons. Fits some 2 gang boxes. Allow at least 1.9" [4.8 cm] depth in the wall or furniture.)
Product weight 1.9 lbs (0.9 kg)
Shipping weight 6 lbs (3 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, C-tick, CUL, UL
EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
Accessibility Complies with the appropriate requirements of Section 508 of the Rehabilitation Act (29U.S.C.794d).
MTBF 30,000 hours
Warranty 3 years parts and labor